2100-956SS

External Powered Surface Mount Elevator Phones

2100-956SS Surface Mount Elevator SmartPhone

Dimensions: 7-1/4" H x 4-3/4" W x 1-7/8" D
Style: Stainless Steel Box

Code Compliance:

Meets all ADA, ASME A17, and B44 codes for elevator emergency phones
Phone Line Detection Compliant (2.27.1.1.6):
Phone is field programmable to check for an active phone line every 5 minutes up to 23 hours. If an active line is not detected, it will activate the Alarm Relay on the phone board
Conforms to UL Standard 2017 for Attendant Monitored Signaling Devices
Complies with Section 6.4 of UL 60950-1

Power Requirements:

Requires an analog (POTS, PBX, or central office phone line), digital, or IP phone line.
If used on an IP system, you must purchase a RATH® 2100-VOIP2CS Interface Device. If you have one from the IP provider, program it with a standard WINK or disconnect signal per FCC and CRTC requirements
Designed for 120vac or 24vac/vdc power

Programming Features:

Phone Capabilities:

Compatible with SmartRescue, Command Center, and Machine Room Rescue phones for in-building rescue coordination
Automatic dialer (31 digit programmable memory)
Automatic answer feature with audible ring
Built-in consolidator feature allows you to install 10 SmartPhones on a single telephone line without any additional equipment
External power drives built-in phone consolidator and line detection compliance

Additional Features:

Remote or on-site diagnostic test
Fully programmable timer feature can be set from 1 to 999 minutes and will prompt called party to extend the call
2vdc, 1/3 watt LED (solid light when dialing, flashes when answered)

Optional Features:

Annunciator Interface that allows your annunciator to use our phone speaker for audio outputs. It saves money on extra grill work and additional speaker and will not interfere with emergency communications
Alarm board
Mushroom button
Stainless Steel frame 7002N

Specifications:

Downloads: