2100-958MB

2100-958MBElectrical Testing Labs (ETL) Listed

  • Dimensions:
    • 12-1/2"H x 9-3/4"W
    • 8"H x 6"W x 3"D (Back Box)
  • Brushed Antique Bronze face plate, metal back box
  • Mounts via back box
  • Phone Line Detection Compliant (2.27.1.1.6):
    Phone is field programmable to check for an active phone line every 10 minutes up to 23 hours. If an active line is not detected it will activate the Alarm Relay on our phone board. If equipped with our Auxiliary Relay board you can sync Relay 2 to activate at the same time as the Alarm Relay to trigger another device. Use with our Alarm and Junction Board or with the 2100-ALARM, they are simple to install and only require 12 or 24vac/vdc power
  • Dials up to 5 emergency numbers
  • Program to play location identification message (18 seconds)
  • Built-in Consolidator Feature allows up to 10 phones on a single phone line without any additional equipment
  • Use the RATH® Supervisory Software to monitor the Elevator Phones
  • Designed for either 120vac or 24vac/vdc power
  • Built-in battery backup recharges from 120vac or 24vac/vdc power (allows for a minimum of 4 hours of talk time)
  • Program with on-board keypad or remotely with a touch-tone phone
  • Compatible with Analog, Digital and VoIP phone lines (VoIP will require our 2100-VoIP2CS Interface Device)
  • Conforms to UL Standard 2017 for Attendant Monitored Signaling Devices
  • Complies with Section 6.4 of UL 60950-1
  • ETL Listing Number: 5013373
  • Option(s):

Click Here to Download: