SmartView Controller 2100-SVCB

SmartView Two-Way Elevator Visual Communication System

The 2100-SVCB SmartView Controller is the brains of the system that connects the software, display, buttons, and camera for a fully functional system.
The board is mounted inside of a box that can be mounted to the elevator car.

Dimensions: 6.99" H x 12.04" W x 1.98" D

Installation Requirements:

• Internet Connection:
  • Routed internet connection using DHCP, OR
  • Cellular modem with data (available from RATH®)
• Laptop with a network connection for testing

Part Numbers:

• 2100-SVCB: Press Yes or No Button
• 2100-SVCB-1: Press Door Open for Yes, Press Door Closed for No
• 2100-SVCBCE (for use with CE Elite Pi): Press Yes or No Button
• 2100-SVCBCE-1 (for use with CE Elite Pi): Press Door Open for Yes, Press Door Closed for No

Code Compliance:

• Certified to CSA Standard B44.1, conforms to ASME Standard 17.5

Power Requirements:

• 12v or 24v through 2100-SVE Extender
• Requires power from the elevator or remotely in the machine or electrical room

Wiring Requirements:

• Requires CAT5 or better Ethernet connection or connection to a 2-wire extender

Programming Features:

• Board features a uniquely assigned ID address for easy software setup

Additional Features:

• Compatible with the SmartView Software
• Compatible with the SmartView Display
• Connection for the SmartView Camera
• Dry contacts for Yes/No inputs
• Data Usage: 4.4 mb/minute in active state, 0 in idle state (pings every 24 hours)
• Current Draw:
  • Active: 12v = 1A , 24v = 0.5A
  • Idle: 12v = 0.5A, 24v = 0.25A

Specifications:

• Environmental: 32°F to 158°F (0° C to 70° C)
• Mounting: Mounting Plate included
• Warranty: 2 years

Downloads:

• 2100-SVCB Series - SmartView Controller Data Sheet
• SmartView System Overview
• SmartView System Installation and Operations Manual
• SmartView System Specifications