SmartView Flush Mount System (2100-SVFCOMP)
SmartView Two-Way Elevator Visual Communication System
The 2100-SVFCOMP is a flush mount unit that includes the SmartView controller, camera, display, and YES and NO buttons.
It is compatible with the SmartView Software.
Dimensions: 8" H x 9.25" W x 2" D
Style: Stainless Steel
The 2100-SVFCOMP is a flush mount unit that includes the SmartView controller, camera, display, and YES and NO buttons.
It is compatible with the SmartView Software.
Dimensions: 8" H x 9.25" W x 2" D
Style: Stainless Steel
Installation Requirements:
- Internet Connection:
- Routed internet connection using DHCP, OR
- Cellular modem with data (available from RATH®)
- Laptop with a network connection for testing
Code Compliance:
Power Requirements:
Wiring Requirements:
Additional Features:
Specifications:
Downloads:
- Certified to CSA Standard B44.1, conforms to ASME Standard 17.5
Power Requirements:
- 12v or 24v through 2100-SVE Extender
- Requires power from the elevator or remotely in the machine or electrical room
Wiring Requirements:
- Requires CAT5 or better Ethernet connection or connection to a 2-wire extender
Additional Features:
- Compatible with the SmartView Software
- The SmartView Controller Board features a uniquely assigned ID address for easy software setup
- All-in-one mounting frame includes SmartView Controller Board, Display, Camera, and Buttons
- Back box included
- Data Usage: 4.4 mb/minute in active state, 0 in idle state (pings every 24 hours)
- Current Draw:
- Board: 12v = 1A, 24v = 0.5A
- Camera: 5v = 0.12A (powered by board)
- Display: 5v = 0.59A (powered by board)
- Total: 12v = 1.46A, 24v = 0.73A
Specifications:
- Environmental: 32°F to 158°F (0° C to 70° C)
- Mounting: Flush Mount
- Warranty: 2 years
Downloads:
