2100-VOIP2CS
2100-VOIP2CS

2100-VOIP2CS

Item# 2100-VOIP2CS
$205.00

Interface Features:
  • Allows up to (2) RATH® 2100 series phones on an IP phone system
  • Phone line verification included
  • Install either in the machine room or a phone room
  • Simple to configure to your customer's IP system (requires a laptop)
  • Can place a call on a Cisco Network or cloud based service provider
  • Includes two FXS ports (one LAN and one WAN)
  • VoIP Protocols: SIP v2, SDP, RTP, and RFC 2833
  • Network Protocols: IPv4, TCP, UDP, DHCP, SNTP, STUN, HTTP, and PPPoE
  • Connections: FXS RJ11 and WAN RJ45 (10/100 BaseT)
  • Power Consumption: 5w

Code Compliance:
  • FCC Part 15 Class B Compliant

Power Requirements:
  • 120vac from a backed up power source or RATH® RP7700100

Wiring Requirements:
  • Requires a standard copper run between the elevator phone and 2100-VOIP2CS
  • Connect the elevator phone to 2100-VOIP2CS via a standard RJ11 jack and to SIP phone system via a standard RJ45 jack (maximum wire run of 300' between 2100-VOIP2CS and Network Switch)

Specifications:
  • Environmental: 32°F - 13°F
  • Warranty: 2 years

Downloads:


2100-VOIP2CS