Voice and Data 4G LTE Cellular Gateway
2010 Code Compliant

2100-VOIPLCCV 4G LTE IP Based Cellular Gateway
2100-VOIPLCCV 4G LTE IP Based Cellular Gateway

Cellular Features:
  • Dimensions: 11-1/2" H x 10" W x 5" D
  • The RATH® 2010 Code Compliant elevator phone cellular gateway is compatible with Verizon and requires a 4G LTE SIM card and the account IP Address
  • Only compatible with RATH® SmartPhone VI models
  • Transmits both voice and data wirelessly
  • Allows you to use up to (2) RATH® 2100 series elevator phones and the data output from your elevator monitoring device
  • RATH® 2100 series phone performs emergency communication failure check and provides “alarm” output when cellular network goes down
  • Places call via IP based cellular accounts. Must setup low cost IP based account with the RATH® approved vendor. A standard 4G LTE cellular account with Verizon
  • Requires standard 15mm x 25mm SIM card.
  • Includes (2) FXS ports (RJ11) for phone connection and connection for elevator monitoring device (if monitoring output is phone based, as opposed to IP based, you can only connect (1) 2100 series phone, the other FXS port is for monitoring)
  • End user contracts directly with a cellular provider
  • Requires two wire connection from elevator phone to cellular device and either two wire or ethernet from elevator monitoring device
  • Surface mounted usually in machine room or location with strong signal
  • Includes cellular antenna
  • VoIP Protocols: SIP v2, SDP, RTP, and RFC 2833
  • Network Protocols: IPv4, TCP, UDP, DHCP, SNTP, STUN, HTTP, and PPPoE
  • Connections: FXS RJ11, LAN, and WAN RJ45 (10/100 BaseT)
  • Requires 120vac power with battery backup or RATH® RP7700104
  • Power consumption: 8w
  • Wall mount enclosure with door
  • Temp range: -14°F – 122°F
  • FCC Part 15 compliant
  • Two year warranty
  • Click to watch our Cellular Gateway Line Verification Video

Click Here to Download: