SmartRescue10 (2500-210PSS) Flush Mount
In-Building Rescue Coordination designed for 1 - 10 Elevator Phones
2500-210/D
Dimensions:
Face: 13.81" H x 13.81" W x 1.68" D (2.67" D with Handset)
Back Box: 12.56" H x 11.6" W x 1.68" D
Style: Stainless Steel Box, Coil Cord
Code Compliance:
Power Requirements:
Wiring Requirements:
Phone Capabilities:
Additional Features:
Options:
Specifications:
Downloads:
- ADA, ASME A17, and B44 code compliant
- Conforms to UL Standard 2017 for Attendant Monitored Signaling Devices
- Complies with Section 6.4 of UL 60950-1
- Volume control handset meets ADA requirements
Power Requirements:
- Requires a single analog (POTS, PBX, or central office phone line) or digital phone line. If used on an IP or cellular network, you must purchase an additional interface device from RATH®
- Designed for 120vac power
Wiring Requirements:
- Run twisted and shielded 4 wire set from each SmartPhone to SmartRescue unit and one standard phone line to the outside world
Phone Capabilities:
- Telephone Line Voltage: 24V-48V
Additional Features:
- Easy to use push buttons
- Passively monitor communications between elevators and the outside world via the LEDs
- Solid lit LED indicates there is an emergency call in progress
- Slow blinking LED indicates there is a call on hold
- Audible alert when elevator initiates a call to SmartRescue
- Includes relay contact that trips if any SmartPhone has been activated
- Includes connections for (2) Sub-Stations (Model 2300-630SM) for Machine Room communication
- The SmartRescue is able to:
- Call into all or individual elevators as needed
- Join existing conversations between cars and outside world
- Hang up and original conversation will continue
- Terminate outside world so it is only talking to the elevator or terminate the call with all parties entirely
Options:
- English/French Face Plate
Specifications:
- Mounting: Flush Mount
- Warranty: 2 years
Downloads:
