SmartView SmartRescue

SmartView SmartRescue

SmartView Two-Way Elevator Visual Communication System

The SmartView SmartRescue Lobby & Machine Room Communication ideal for smaller installations, between 1-10 Elevator phones.
The unit includes the SmartView Display, can be flush or surface mounted and is pre-configured with the SmartView Software.

SmartView SmartRescue
Style: Powder Coated Steel Enclosure, Coil Cord


Part Numbers & Dimensions:
  • Surface Mount Cabinet:
    • 2500-205BSV (up to 5 Call Boxes)
    • 2500-210BSV (up to 10 Call Boxes)
    • Dimensions: 21.03" H x 20.3" W x 5.19" D
  • Flush Mount Cabinet:
    • 2500-205FMSV (up to 5 Call Boxes)
    • 2500-210FMSV (up to 10 Call Boxes)
    • Dimensions:
      • Front Frame: 21.13" H x 25" W x 3.06" D
      • Back Box: 20.66" H x 22.99" W x 3" D

Code Compliance:
  • Certified to CSA Standard B44.1, conforms to ASME Standard 17.5
  • Volume control handset meets ADA requirements

Power Requirements:
  • Designed for 120vac power
  • Built-in battery backup recharges from 120vac power (allows for a minimum of 4 hours talk time upon power loss)

Wiring Requirements:
  • Run twisted and shielded 4 wire set from each SmartPhone to unit and one standard phone line to the outside world

Phone Capabilities:
  • Telephone Line Voltage: 24v-48v
  • Requires a single analog (POTS, PBX, or central office phone line) or digital phone line. If used on a VoIP or cellular network, you must purchase a RATH® 2100-LTEGSM4 Gateway Device

Additional Features:
  • Cabinet features twist lock closure for use with Firemanís lock (not provided)
  • Pre-configured to the SmartView Software
  • Easy to use push buttons
  • Passively monitor communications between elevators and the outside world via the LEDs
    1. Solid lit LED indicates there is an emergency call in progress
    2. Slow blinking LED indicates there is a call on hold
  • Audible alert when elevator initiates a call to the unit
  • Includes relay contact that trips if any SmartPhone has been activated
  • The unit is able to:
    1. Call into all or individual elevators as needed
    2. Join existing conversations between cars and outside world
    3. Hang up and original conversation will continue
    4. Terminate outside world so it is only talking to the elevator or terminate the call with all parties entirely

SmartView Display & Controller Features:
  • Display requires 9v@1.2A and includes 120v plug-in transformer
  • Mini PC requires 12v@1.5A and includes 120v plug-in transformer
  • Requires back-up power or RATH® RP7700107
  • Ethernet connection
  • HDMI connection for display

Specifications:
  • Mounting: Surface or flush mount
  • Design: Powder coated steel enclosure with twist lock closure
  • Warranty: 2 years

Downloads:


SmartView SmartRescue